The sprocket assembly of the scraper is an important transmission system of the scraper conveyor. It is an important transportation machine among the three mining machines. The working principle is simple and clear. It mainly consists of the sprocket body, the sprocket shaft, the bearing seat, the floating seal ring, the O Ring, end cap, transparent cover and other accessories.

The working process of the scraper sprocket assembly is simple and clear. The power is transmitted from the input coupling through the sprocket assembly layer by layer to the scraper chain of the scraper, so that the scraper chain can transport the coal material from the fully mechanized mining area. The sprocket assembly is an important transmission component on the scraper. The transmission process is mainly: first, the motor transmits the output torque to the reducer, and the reducer reduces the output torque and speed of the motor and then inputs it into the coupling. The output torque is directly input to the sprocket assembly. The sprocket shaft inside the sprocket assembly obtains the torque and transmits it to the sprocket body through the spline. The sprocket body drives the scraper chain for transmission, and drives the coal on the scraper chain out of the fully mechanized mining area. , to realize the transportation function of coal materials. In this process, the scraper sprocket assembly uses the torque transmitted by the reducer to transport hundreds of tons of coal out of the fully mechanized mining area. The working performance of the machine sprocket assembly determines the efficiency of coal transportation in the fully mechanized mining area.

Scraper sprocket assembly

The above is the introduction of the working principle of the scraper sprocket assembly by the coal machine parts manufacturer. The sprocket assembly of the scraper is an important driving part. In actual use, it is wrapped in pulverized coal, water and coal gangue for a long time, and there are more failures than other accessories. Therefore, once a failure occurs, the well should be lifted immediately for inspection and maintenance. If you have new and maintenance needs for scraper sprocket components and reloader sprocket components, you are welcome to contact us by telephone.